Closeout and One-Off Products
Looking for something unique? Shopping on a budget? We might have what you want here.
Closeout and One-Off Products
Sold Out
Upper Triple Clamp and Bar Mounts, Yamaha Gen1, 22mm offset
Fits 2006+ Yamaha models two-stroke models (YZ125 and YZ250 only), with 22mm offset lower clamps, clear or blue anodize colors. This probably won't fit your bike. You must have 22mm offset lower clamps for this to work! The stock offset on the two stroke models is 25mm, so you need to already have 22mm offset clamps, otherwise these will not fit.
If you already have 22mm offset clamps, or have found a bottom 22mm clamp (the stock four stroke bottom clamp from most years will work), then these will likely fit. If in doubt, ask! Includes top triple clamp, bar mounts, and titanium hardware as pictured.Download installation instructions: INSTRUCTIONS-LUX-YAM-SS-A0001.pdf
Sold Out
Optimized Triple Clamps, 2013+ KTM and Husqvarna
Stock KTM/Husqvarna triple clamps are rather lightweight as-is, but they lack strength and stiffness. Our design goals for these clamps were to increase stiffness and strength without adding weight, and we did just that. For nearly the same weight, our clamps are up to 33% stiffer and nearly twice as strong as the stock clamps. And our bar mount fixes the twisting issue that plagues the stock setup. Fits 2013+ model year KTM and Husqvarna motocross models, stock 22mm offset; available in blue anodize only. Check out our product brochure below for more details. Includes upper and lower clamps, steering stem, lower steering bearing/race/seal pre-installed, rubber-mounted 1 1/8" bar mounts, titanium bolts, anti-seize, steering stem bolt, and decals. Bar mounts are 95mm spacing, not stock spacing (90mm), so aftermarket damper mounts may not be compatible.
Download product brochure and clamp specifications: LUX-KTM-SS-A0004-SPECS.pdf
Download installation instructions: INSTRUCTIONS-LUX-KTM-SS-A0004.pdf
Sold Out
2013+ KTM/Husqvarna Triple Clamps - Pre-production Model
In the transition from prototype to production, we often run a pre-production manufacturing batch. The pre-production parts are tested and we make minor revisions before going to production. In this case, the clamps are minimally different from our production versions with different mounting for the FI light, different finishes and colors, and minor geometric changes for manufacturability. Limited quantities available, includes upper and lower clamps, steering stem, a full set of steering bearings and seals, 1 1/8" bar mounts and cones, titanium bolts, anti-seize, steering stem bolt, FI light bracket, and decals. Stock 22mm offset.
Sold Out
Relay Arm with Bearings, 2015.5+ KTM/Husqvarna
This relay arm is stock geometry; precision CNC machined from billet aluminum and anodized black. Includes everything as pictured: relay arm, bearings, shafts, collars, and seals. Fits 2015.5+ model year KTM and Husqvarna motocross models. This was a one-off pre-production run, limited quantities available.