M10 Direct Bolt-On Interface:

The M10 interface is a raised block on the top triple clamp, 20 mm wide, with multiple (two or three) 10 mm threaded holes per side. The bar mounts sit on these blocks and bolt directly to the triple clamp with an M10 bolt. These mounts fit many KTM, Husqvarna, GasGas, Sherco, Kove, and Beta Motocross, Off-Road, Enduro, Freeride, Adventure, Supermoto, and Street bikes that use the M10 interface. They do NOT fit the triple clamps with rubber cones in them or with unthreaded holes. If in doubt, contact us!

Fitment:

Our mounts fit the vast majority of Motocross, Off-Road, and Enduro bikes without issue. In rare cases, you may need to trim plastic brackets or relocate hour meters or accessories to allow clearance in the extreme mounting positions (for example: front hole, bars away from the rider). For Supermoto, Adventure, and Street bikes, the mounts may interfere with the gas tank at full steering lock for the furthest back bar position (close mount hole, bars back toward the rider). Always check for full clearance after installation and before riding.

---

Bar Size

Luxon 1 1/8" bar mounts fit standard 1 1/8" (28.6 mm) handlebars (sometimes called fatbars) and 36 mm mounts fit the Renthal FB36 bars (36 mm). These are NOT the same as fatbars, they have a much larger clamping diameter. If you're not sure, you almost certainly want the 1 1/8" bar size!

We do not offer bar mounts to fit the old 7/8" size handlebars. BRP and other aftermarket companies offer adapter bushings to fit the 7/8" bar diameter in standard 1 1/8" mounts if necessary.

---