M12 Solid Bar Mounts, Luxon G3 and Xtrig Clamps
These solid mounted bar mounts fit our Gen3 triple clamps and Xtrig triple clamps (they do NOT fit stock triple clamps). Our solid bar mounts are lightweight, strong, and include high-strength steel mounting hardware. Titanium bar clamp hardware is an optional upgrade. These mounts are low profile at 21 mm high (from top of the triple clamp to tangent bottom of the bar clamp) and are compatible with our riser kit for 21, 26, 31, and 36 mm height options.
- $109.95 (Steel Clamp Bolts)
Product Description, Fitment, Information, and Details
M12 Direct Bolt-On Interface:
The M12 interface on a Luxon Gen3 triple clamp (click to enlarge)
The M12 interface is a recessed slot on the top triple clamp, 26 mm wide, with three 12 mm threaded holes per side. The bar mounts sit in these slots and bolt directly to the triple clamp with an M12 bolt.
Fitment:
These mounts fit Luxon Gen3, Gen3 Pro, and many Xtrig triple clamps. They do NOT fit stock clamps or other aftermarket clamps.
Our M12 mounts fit Luxon Gen3, Gen3 Pro, and most Xtrig triple clamps. If in doubt, please double check that your triple clamps have an M12 interface as exlained above.
- Luxon
- All Gen3 Triple Clamps
- All Gen3 Pro Triple Clamps
- Xtrig
- All modern Xtrig Triple Clamps
Solid bar mounts are the ultimate in low weight, high strength, and reliability, plus they offer a more dirtect feel to the front wheel. This all comes with reduced comfort, bump, and vibration isolation, when compared to our 4-post rubber isolated bar mounts.
Includes lower bar mounts, upper bar clamps, high-strength steel mounting hardware, anti-seize, and instructions. Titanium bar clamp bolts are an optional upgrade.
These mounts have a height of 21 mm (bottom of bar to top of triple clamp) and a 3.75 mm offset (7.5 mm of bar position change when flipping the mounts around). An optional spacer kit is available (allows 21 mm, 26 mm, 31 mm, and 36 mm heights).
| Luxon Part# | LUX-GEN-SS-A0010-118 |
|---|---|
| Luxon Description | BAR MOUNTS, SOLID, M12 |
| Weight | 301 g, 0.66 lbs |
| Weight | 281 g, 0.62 lbs (with Ti bolts) |
| Stock Weight | N/A |