Gen3 Rubber Isolated Bar Mounts, M12 interface for Luxon Gen3 and Xtrig Clamps
Our 4-post style bar mount is rubber isolated and designed to reduce vibration felt from the engine, eliminate twisting in small crashes and tip-overs, and absorb hard hits and track roughness without compromising steering precision. Three different rubber bushing hardness levels are included to fine tune the feel. The Gen3 mounts are lightweight and low profile at only 21 mm in height (bottom of bar to top of triple clamp), but we offer this bar riser kit to raise them up 5, 10, or 15 mm.
Bar size is available for both standard 1 1/8" or 36 mm (Fits Renthal FB36 bars only) sizes.
- $189.95 (Steel Bar Clamp Bolts)
- Pre-order, ships late September, 2023.
- Pre-orders will ship with 3D printed rubber dampers. Production dampers will ship separately when available (mid-October, injection molds have a long lead time).
Product Description, Information, and Details
These mounts fit our Gen3 triple clamp lineup as well as Xtrig triple clamps with an M12 interface. They do not fit stock clamps. Includes rubber isolated lower bar mounts, upper bar clamps, high-strength steel mounting bolts, high-strength steel clamp bolts, anti-seize, and instructions. Titanium bar clamp bolts are an optional upgrade. 21 mm bar height with optional spacer kit available. Our measurements are taken from the top of the triple clamp to the bottom tangent of the mount (the bottom of where the handlebar sits).
Luxon 1 1/8" bar mounts fit standard 1 1/8" (28.6 mm) handlebars (sometimes called fatbars) and Luxon 36 mm mounts fit the Renthal FB36 bars (36 mm). These are NOT the same as fatbars, they have a much larger clamping diameter. We do not offer bar mounts to fit the old 7/8" size handlebars. BRP and other aftermarket companies offer adapter bushings to fit the 7/8" bar diameter in standard 1 1/8" mounts if necessary.
| Luxon Part# | LUX-GEN-SS-A0011 |
|---|---|
| Luxon Description | GEN3 BAR MOUNTS, 4-POST RUBBER |
| Weight | 362 g, 0.80 lbs |
|---|---|
| Weight | 342 g, 0.75 lbs (with Ti bolts) |
| Stock Weight | N/A |
| Xtrig PHDS Weight | 506 g, 1.12 lbs |