Gen3 Pro Triple Clamps, Honda
The most advanced triple clamps available: Adjustable offset (21, 22, 23, and 24 mm) and adjustable stiffness. High strength, yet lightweight, with optimized flex for more comfort and steering precision than stock or other aftermarket clamps. Our Gen3 Clamp Blog has all the details.
Stock bar mounts are NOT compatible. Please read the Fitment tab below for bike and bar mount specifics.
| Clamp | Status | ETA |
|---|---|---|
| Black | In Stock | Now |
| Red | In Stock | Now |
- $999.95 (No Bar Mounts)
Product Description, Fitment, Information, and Details
Bike Fitment
2021-2026 CRF450 and 2022-2026 CRF250:
Direct Fit
Fits many newer off-road models, but may not support all mounting brackets for lights, steering lock, etc.
Will also fit 2009-2020 motocross models upgraded to the newer fender and numberplate. Older models may require a bearing swap (2010-2017 250 and 2009-2016 450)
Will fit 2000-2007 aluminum framed two stroke motocross models upgraded to a newer front end (plastics, wheel, and forks). We can machine these clamps to fit the 47 mm forks as a special order, contact us for details (you'll still need the updated fender and number plate).
Plastic Fitment Notes:
These clamps do not include a brake line guide mount. We recommend either the Cycra Stadium Plate (comes with integrated guide) or a number plate mounted brake line guide (Acerbis part number 2042200001 works well).
Bar Mounts
All Luxon Gen 3 triple clamps use the M12 mounting interface: M12 bolts threaded directly into the top triple clamp with a 26 mm wide groove to locate the bar mount. The mounts are spaced 90 mm apart. Gen3 clamps are compatible with Luxon M12 bar mounts as well as any bar mounts compatible with Xtrig M12 clamps.
Luxon 4-post rubber mounted bar mounts are recommended, but we also offer solid bar mounts for those looking for a more precise feel.
Steering Dampers
- • We recommend the Precision Parabolic Damper as it is lightweight, low-profile, and very effective. It's a direct bolt-on with our 4-post or solid bar mount options.
- • For Scotts damper users, we have an above the bars top mount available here. This fits both our 4-post and solid bar mount options.
- • Any bar mount/steering damper setup that fits the M12 (Xtrig) interface will fit our Gen3 clamps.
- • HPSD (Honda damper) users will need our lower bracket kit. The upper bracket is not included; we recommend a weld-on solution.
The Gen3 Pro clamps are the pinnacle of triple clamp technology and designed for the most demanding riders. Lighter and stronger than stock, they feature adjustable offset and adjustable stiffness to fine tune your ride. Bores are finish machined from the 7075-T6 aluminum after anodize ensuring precise alignment and eliminating slippage.
Stiffness parameters have been optimized for precision without sacrificing comfort. These clamps feature a split lower to improve suspension plushness (see our blog post for details). Optional braces are included that tie the lower split together to fine tune stiffness for faster riders who prefer a more precise handling character at the sacrifice of some comfort.
Fits many Honda motocross and off-road models and features adjustable offset in 21, 22, 23, and 24 mm. Choose from black or red anodize colors. Includes upper and lower clamps, two steering stems, two OEM lower bearings/races/seals installed, two offset inserts, braces for flex adjustment, titanium pinch bolts, and anti-seize.
Installation instructions can be found on our customer page.
| Luxon Part# | LUX-HON-SS-A0005 |
|---|---|
| Luxon Description | Gen3 Pro Triple Clamps, Honda |
| Weight | 1,914 g, 4.22 lbs |
| Stock Weight (2024 450) | 2,124 g, 4.68 lbs |
- Stock Offset of 20 mm
- 2009-2016 CRF450R
- 2014-2017 CRF250R
- Stock Offset of 22 mm
- 2008 CRF450R
- 2017-2026 CRF450R
- 2018-2026 CRF250R
- Stock Offset of 24 mm
- 2002-2007 CRF450R
- 2004-2017 CRF250X
- 2005-2007 CRF450X