Gen3 Pro Triple Clamps, KTM, Husqvarna, GasGas
The most advanced triple clamps available: Adjustable offset (21, 22, 23, and 24 mm) and adjustable stiffness. High strength, yet lightweight, with optimized flex for more comfort and steering precision than stock or other aftermarket clamps. Our Gen3 Clamp Blog has all the details. These clamps also eliminate the pinch bolt stem design and replace it with the robust Japanese style steering stem.
Stock bar mounts are NOT compatible. Please read the Fitment tab below for bike and bar mount specifics.
| Clamp | Status | ETA |
|---|---|---|
| Black | In Stock | Now |
| Orange | Backorder | mid-October |
| Blue | In Stock | Now |
| Red | In Stock | Now |
- $999.95 (No Bar Mounts)
Product Description, Fitment, Information, and Details
Bike Fitment
Our Gen3 clamps have done away with KTM's problematic steering stem pinch bolt system and use a more traditional double nut system. The clamps include the necessary steering stem nuts and assemble just like a Japanese bike.
2023-2026 KTM/Husky, 2024-2026 GasGas:
Our clamps are designed around motocross/off-road applications and are a direct fit for most KTM group off-road bikes. Some bikes, such as the KTM 500 EXC-F, will need to have the steering lock removed (but everything else fits fine).
2016-2022 KTM/Husky, 2021-2023 GasGas:
You must update to the new 2023+ top bearing seal, KTM part number A46001086000 (this single piece seal replaces the o-ring, rubber seal, and steel cup of the old design). With the new seal update, our clamps are a direct fit. Luxon clamps are designed around motocross/off-road applications and fit most KTM group off-road bikes. Some bikes, such as the KTM 500 EXC-F, will need to have the steering lock removed (but everything else fits fine).
Bar Mounts
All Luxon Gen 3 triple clamps use the M12 mounting interface: M12 bolts threaded directly into the top triple clamp with a 26 mm wide groove to locate the bar mount. The mounts are spaced 90 mm apart. Gen3 clamps are compatible with Luxon M12 bar mounts as well as any bar mounts compatible with Xtrig M12 clamps.
Luxon 4-post rubber mounted bar mounts are recommended, but we also offer solid bar mounts for those looking for a more precise feel.
Steering Dampers
- • We recommend the Precision Parabolic Damper as it is lightweight, low-profile, and very effective. It's a direct bolt-on with our 4-post or solid bar mount options, but you will need to run a +5 mm bar mount riser (brings the bars to stock height).
- • For Scotts damper users, we have an above the bars top mount available here. This fits both our 4-post and solid bar mount options.
- • Any bar mount/steering damper setup that fits the M12 (Xtrig) interface will fit our Gen3 clamps.
- • The HPSD (Honda damper) and similar WP damper mount kits are compatible with our Gen3 clamps.
The Gen3 Pro clamps are the pinnacle of triple clamp technology and designed for the most demanding riders. Lighter and stronger than stock, they feature adjustable offset and adjustable stiffness to fine tune your ride. Bores are finish machined from the 7075-T6 aluminum after anodize ensuring precise alignment and eliminating slippage.
Stiffness parameters have been optimized for precision without sacrificing comfort. These clamps feature a split lower to improve suspension plushness (see our blog post for details). Optional braces are included that tie the lower split together to fine tune stiffness for faster riders who prefer a more precise handling character at the sacrifice of some comfort.
Fits many 2016-2026 model year KTM, Husqvarna, and GasGas motocross and off-road models and feature adjustable offset in 21, 22, 23, and 24 mm. Choose from black, orange, blue, or red anodize colors. Includes upper and lower clamps, two steering stems, two OEM lower bearings/races/seals installed, two offset inserts, steering stem nuts, braces for flex adjustment, titanium pinch bolts, and anti-seize.
Installation instructions can be found on our customer page.
| Luxon Part# | LUX-KTM-SS-A0011 |
|---|---|
| Luxon Description | Gen3 Pro Triple Clamps, KTM, Husqvarna, GasGas |
| Luxon Weight (with 1 1/8" 4-Post Bar Mounts) | 2,140 g, 4.72 lbs |
| Stock Weight (2026 KTM/Husky) | 2,229 g, 4.91 lbs |
| Stock Weight (Powerparts Factory Clamps) | 2,300 g, 5.07 lbs |
| Xtrig ROCS with PHDS Bar Mount | 2,313 g, 5.10 lbs |
| Ride Engineering Split Clamps | 2,350 g, 5.18 lbs |
- Stock Offset of 20 mm
- KTM EXC/EXC-F XC-W/XCF-W 2013-2015
- Husqvarna TE/FE 2014-2015
- Stock Offset of 22 mm
- KTM SX/SX-F 2013-2026
- KTM XC/XC-F TPI-XC-F 2016-2026
- KTM EXC/EXC-F TPI-EXC-F XC-W/XCF-W TPI-XCF-W 2016-2026
- Husqvarna TC/FC/TX/FX/TE/FE 2016-2026
- GasGas MC/MC-F/EC/EC-F 2021-2026