Gen2 Triple Clamps, KTM/Husky/GasGas
The most advanced triple clamps you can buy result from 1000s of hours of extensive engineering, analysis, and testing. Race proven in professional supercross and motocross; our clamps are optimized to be stronger and lighter than stock, stiff where they need to be, yet compliant and flex for comfort and rideability. Fits various 2013+ model year KTM, Husqvarna, and GasGas models, stock 22mm offset, choose from blue, orange, red, black, or clear (silver) anodize colors.
Select to add Luxon bar mounts or no bar mounts. Our clamps are compatible with any bar mounts that fit stock KTM/Husqvarna rubber mounted triple clamps. So use your favorite mounts, or use our lightweight anti-twist mounts for the full package. Check out our blog post for more information on our bar mounts.
Luxon Gen 2 bar mounts fit oversize 1 1/8" (28.6 mm) handlebars (sometimes called fatbars) and Luxon Gen2 FB36 mounts fit the new Renthal FB36 bars (36 mm).
Want to raise the bars a bit? Add these bar riser spacers to your mounts for some more height.
- $879.95 (with Luxon Bar Mounts)
- $899.95 (with Luxon FB36 Bar Mounts)
- $699.95 (No Bar Mounts)
Product Description, Information, and Details
Stock KTM/Husqvarna triple clamps are rather lightweight as-is, but they lack strength and torsional stiffness. Our design goals for these clamps were to increase torsional stiffness for more steering precision, and increase strength without adding weight. And we did just that! Our clamps feature an optimized balance of stiffness: stiffer in torsion for precise steering, stiffer vertically to maintain fork alignment, yet balanced stiffness with enough flexure in lateral and longitudinal directions for comfort and rideability. Plus they're significantly stronger than the stock clamps. And our bar mount fixes the twisting issue that plagues the stock setup. The new split lower clamp design allows the fork tubes to flex more smoothly at the clamp interface allowing a smoother suspension stroke and more comfort for the rider (see our blog post for details).
Check out our product brochure below for more details. Includes upper and lower clamps, steering stem, lower steering bearing/race/seal pre-installed, titanium bolts, anti-seize, steering stem bolt, and decals. Luxon Triple clamps fit stock KTM/Husky bar mounts, but we highly recommend our anti-twist mounts, which are available in both 1 1/8" and Renthal Fatbar36 (36 mm) sizes.
Download product brochure and clamp specifications: LUX-KTM-SS-A0004-G2-SPECS.pdf
Download installation instructions: INSTRUCTIONS-LUX-KTM-SS-A0004-G2.pdf
|Luxon Part#||LUX-KTM-SS-A0004-G2-BLUE, ORANGE, CLEAR, BLACK, RED|
|Luxon Description||Gen2 Optimized Triple Clamps, 2013+ KTM/Husqvarna/GasGas|
|Luxon Weight (with 1 1/8" Bar Mounts)||2,094 g, 4.62 lbs|
|Stock Weight (2022 KTM/Husky)||2,122 g, 4.68 lbs|
|Stock Weight (2022 GasGas)||2,099 g, 4.63 lbs|
|Stock Weight (Powerparts Factory Clamps)||2,203 g, 4.86 lbs|
|Ride Engineering Split Clamps (with hardware)||2,350 g, 5.18 lbs|
- Stock Offset of 20 mm
- KTM EXC/EXC-F XC-W/XCF-W 2013-2015
- Husqvarna TE/FE 2014-2015
- Stock Offset of 22 mm
- KTM SX/SX-F 2013-2022
- KTM XC/XC-F TPI-XC-F 2016-2022
- KTM EXC/EXC-F TPI-EXC-F XC-W/XCF-W TPI-XCF-W 2016-2022
- Husqvarna TC/FC/TX/FX/TE/FE 2016-2022
- GasGas MC/MC-F/EC/EC-F 2021-2022