Replacement parts for our Nexus bar mount system are available below (if you're looking for other replacement parts, those are available here). Please be sure to order the correct parts, there are many options and everything is a little different! Double check your order quantites, some items are sold individually while others are sold in sets. Have any questions, or don't see what you need? Contact us.
Everything you need to convert your Nexus bar mounts from one bike fitment to another. Our mounts use identical part for every bike, except for the base portion that fits the actual triple clamp. This kit includes everything needed to adapt your existing Nexus bar mounts to another bike and includes the base, attachment bolts, and cones (if applicable). Choose the appropriate fitment:
Refresh the rubber bushings in your Luxon Nexus bar mount for a new feel. This includes a replacement set of four bushings (2 top and 2 bottom); choose from Soft (Green), Medium (Yellow), and Firm (Red). These do NOT fit any other bar mounts, only the Luxon Nexus mounts.
This is a set (of two each) upper and lower replacement Nexus bar clamps.
This is a set (of two) replacement bases for Luxon Nexus bar mounts. These are the bases only and do not include cones or bolts. Choose the appropriate fitment:
This is a set of replacement cones for Luxon Nexus bar mounts. These are the cones only and do not include bolts. Choose the appropriate fitment (Kawasaki includes four cones):
This is a set (of two) replacement bar mount top caps.
These are the same steel bolts used in our bar mounts, but may fit other brands or locations as well (check sizes to be sure). Prices listed are per bolt. Loctite C5-A anti-seize is required for bar clamp bolt installation, and is not included with the bolts. It is available for purchase below in 7 gram packets. Other bolts may require Loctite 243 threadlocker or other preperation, check the installation instructions for details.
Bar clamp bolts are M8-1.25x25 with a JIS style 10 mm head
M10 Bar mount to triple clamp bolts fit the KTM and Beta M10 interface only. M10-1.5x30 with a low profile head, allen wrench drive.
Bar mount to triple clamp bolts are M12-1.75 with a low profile head, allen wrench drive. Select your required length for the correct triple clamp:
30 mm: Luxon Gen3 (0 or +5 risers), KTM Cone Interface, Ducati, Stark Varg
35 mm: Kawasaki, Honda, Suzuki, and Yamaha 4-Stroke
40 mm: Luxon Gen3 (+10 or +15 risers), Yamaha 2-Stroke
50 mm: Yamaha 2-Stroke with bar riser kit