Triple clamp replacement parts are available below (if you're looking for other replacement parts, those are available here). Please be sure to order the correct parts, there are many options and everything is a little different! Double check your order quantites, some items are sold individually while others are sold in sets. Have any questions, or don't see what you need? Contact us.
These steering stems fit Luxon Gen3 Pro triple clamps only. Specify fitment and 21/24 or 22/23 offset version. Stem only, does not include the bearing.
These steering stems fit Luxon Gen2 and Gen3 Standard triple clamps as well as some stock/aftermarket clamps that use stock stem dimensions. If you are buying this to fit a non-Luxon clamp, please contact us first to verify fitment. These stems do not fit the Gen3 Pro clamps.
These inserts fit the top triple clamp of our Gen3 Pro clamps and are used to adjust the offset.
These braces fit Luxon Gen2 and Gen3 triple clamps and are used to increase stiffness front to back for a more precise feel (at the expense of comfort). They fit all Luxon Gen2 and Gen3 triple clamps and may fit other clamps with a 35 mm bolt spacing. These braces are sold as a pair.
Our Gen3 Pro clamps use this Lock Nut to hold the steering stem in the bottom triple clamp.
For Gen3 and Gen3 Pro KTM, Husky, GasGas, Beta, and Stark Varg clamps, both the Lock Nut and Spanner Nut are used on the top of the steering stem.
The Lock Nut and Spanner Nut also fit the top of the Yamaha stems, but do NOT fit the top threads of Honda or Kawasaki stems. Both nuts are CNC machined from high-strength 7075-T6 aluminum, electropolished, and anodized clear.
These are the same bolts used in our Gen3 Standard triple clamps, but may fit other brands or locations as well (check sizes to be sure). Fork tube clamp bolts are M8-1.25x35 with a JIS style 10mm head. Our Gen3 Pro clamps use the Low Profile M4-0.7x10 bolts to hold the top clamp insert in place. Prices listed are per bolt. Loctite C5-A anti-seize is required for installation, and is not included with the bolts. It is available for purchase below in 7 gram packets.
Replacement pinch bolt for our Gen1 and Gen2 KTM/Husky/GasGas triple clamps. This is a special high strength steel bolt and should be torqued to 20 Nm using Loctite 262 or 263. M8-1.25x25 mm threads with a 12-point 10 mm wrench head.