Gen3 Pro Triple Clamps, Ducati
The most advanced triple clamps available: Adjustable offset (21, 22, 23, and 24 mm) and adjustable stiffness. High strength, yet lightweight, with optimized flex for more comfort and steering precision than stock or other aftermarket clamps. Our Gen3 Clamp Blog has all the details. These clamps also use a (removable) solid number plate mount to eliminate the floppy plastic bracket.
Please read the Fitment tab below for bike and bar mount specifics. Stock bar mounts are NOT compatible, choose from various bar mount options below.
| Clamp | Status | ETA |
|---|---|---|
| Black | In Stock | Now |
| Red | In Stock | Now |
- $999.95 (No Bar Mounts)
Product Description, Fitment, Information, and Details
Bike Fitment
2026 DESMO450 MX/EDX and 2027 DESMO250 MX:
Our clamps are a direct fit for Ducati motocross and off-road bikes.
Bar Mounts
All Luxon Gen 3 triple clamps use the M12 mounting interface: M12 bolts threaded directly into the top triple clamp with a 26 mm wide groove to locate the bar mount. The mounts are spaced 90 mm apart. Gen3 clamps are compatible with Luxon M12 bar mounts as well as any bar mounts compatible with Xtrig M12 clamps.
Luxon 4-post rubber mounted bar mounts are recommended, but we also offer solid bar mounts for those looking for a more precise feel.
Our bar mounts drop the bar height on by 7 mm (vs. the 2026 Desmo 450) for a much better rider position. Bar riser kits are available for those who prefer a taller bar position.
Steering Dampers
- • We recommend the Precision Parabolic Damper as it is lightweight, low-profile, and very effective. It's a direct bolt-on with our 4-post or solid bar mount options, but you will need to run a +5 mm bar mount riser.
- • For Scotts damper users, we have an above the bars top mount available here. This fits both our 4-post and solid bar mount options.
- • Any bar mount/steering damper setup that fits the M12 (Xtrig) interface will fit our Gen3 clamps.
- • HPSD (Honda damper) users will need our lower bracket kit. The upper bracket is not included; we recommend a weld-on solution.
Number Plate Mount
The clamps fit the stock number plate bracket, but also include an aluminum number plate mount to fix the floppy attachment of plastic bracket. When using the optional aluminum mount (recommended), the stock numper plate mount must be cut for clearance, but this is easily accomplished with a dremel tool or razor blade similar to the image below.
Number Plate Bracket Modification
The Gen3 Pro clamps are the pinnacle of triple clamp technology and designed for the most demanding riders. Lighter and stronger than stock, they feature adjustable offset and adjustable stiffness to fine tune your ride. Bores are finish machined from the 7075-T6 aluminum after anodize ensuring precise alignment and eliminating slippage.
Stiffness parameters have been optimized for precision without sacrificing comfort. These clamps feature a split lower to improve suspension plushness (see our blog post for details). Optional braces are included that tie the lower split together to fine tune stiffness for faster riders who prefer a more precise handling character at the sacrifice of some comfort.
Fits the Ducati Desmo 450 motocross model and features adjustable offset in 21, 22, 23, and 24 mm. We recommend a longer offset than the stock 20 mm. Choose from black or red anodize colors. Includes upper and lower clamps, two steering stems, two OEM lower bearings/races/seals installed, two offset inserts, braces for flex adjustment, an aluminum number plate mount, titanium pinch bolts, and anti-seize.
Installation instructions can be found on our customer page.
| Luxon Part# | LUX-DUC-SS-A0002 |
|---|---|
| Luxon Description | Gen3 Pro Triple Clamps, Ducati |
| Luxon Weight | 1,855 g, 4.09 lbs |
| Stock Weight (2026 DESMO 450) | 1,910 g, 4.21 lbs |
- Stock Offset of 20 mm
- Ducati DESMO450 MX