Gen3 Triple Clamps, KTM, Husqvarna, GasGas
The Gen3 triple clamps are a more affordable version of our Gen3 Pro clamps. But that doesn't mean these are a low performance part! We took our Gen3 Pro design, removed some of the more expensive features (titanium bolts, adjustable offset, etc.), and arrived at a version that's still lightweight, strong, and offers a more optimized stiffness balance than stock.
The Gen3 clamps are a significant upgrade and are more compliant front to back for a comfortable ride, yet still stiff in other directions to maintain steering precision, predictability, and feel. Our Gen3 Clamp Blog has all the details.
Stock bar mounts are NOT compatible. Two offset options are available. Please read the Fitment tab below for bike and bar mount specifics.
| Clamp | Status | ETA |
|---|---|---|
| Black, 22 mm | In Stock | Now |
| Orange, 22 mm | In Stock | Now |
| Blue, 22 mm | In Stock | Now |
| Red, 22 mm | In Stock | Now |
| Black, 23.5 mm | In Stock | Now |
| Orange, 23.5 mm | In Stock | Now |
| Blue, 23.5 mm | In Stock | Now |
| Red, 23.5 mm | In Stock | Now |
- $699.95 (No Bar Mounts)
Product Description, Fitment, Information, and Details
Bike Fitment
Two offsets are available: stock 22 mm offset or 23.5 mm offset for added stability (recommended for the 2023+ chassis and/or faster riders on faster tracks).
Our Gen3 clamps have done away with KTM's problematic steering stem pinch bolt system and use a more traditional double nut system. The clamps include the necessary steering stem nuts and assemble just like a Japanese bike.
2023-2026 KTM/Husky, 2024-2026 GasGas:
Our clamps are designed around motocross/off-road applications and are a direct fit for most KTM group off-road bikes. Some bikes, such as the KTM 500 EXC-F, will need to have the steering lock removed (but everything else fits fine).
2016-2022 KTM/Husky, 2021-2023 GasGas:
You must update to the new 2023+ top bearing seal, KTM part number A46001086000 (this single piece seal replaces the o-ring, rubber seal, and steel cup of the old design). With the new seal update, our clamps are a direct fit. Luxon clamps are designed around motocross/off-road applications and fit most KTM group off-road bikes. Some bikes, such as the KTM 500 EXC-F, will need to have the steering lock removed (but everything else fits fine).
Bar Mounts
All Luxon Gen 3 triple clamps use the M12 mounting interface: M12 bolts threaded directly into the top triple clamp with a 26 mm wide groove to locate the bar mount. The mounts are spaced 90 mm apart. Gen3 clamps are compatible with Luxon M12 bar mounts as well as any bar mounts compatible with Xtrig M12 clamps.
Luxon 4-post rubber mounted bar mounts are recommended, but we also offer solid bar mounts for those looking for a more precise feel.
Steering Dampers
- • We recommend the Precision Parabolic Damper as it is lightweight, low-profile, and very effective. It's a direct bolt-on with our 4-post or solid bar mount options, but you will need to run a +5 mm bar mount riser (brings the bars to stock height).
- • For Scotts damper users, we have an above the bars top mount available here. This fits both our 4-post and solid bar mount options.
- • Any bar mount/steering damper setup that fits the M12 (Xtrig) interface will fit our Gen3 clamps.
- • The HPSD (Honda damper) and similar WP damper mount kits are compatible with our Gen3 clamps.
The Gen3 clamps are our entry level triple clamp. While not as high-end as our Gen3 Pro clamps, these clamps are strong yet lightweight. Stiffness parameters have been tuned for a more comfortable ride than stock, yet also increase steering precision and predictability.These clamps also have a split lower clamp to improve suspension plushness (see our blog post for details). The split upper clamp further reduces weight.
Fits many 2016-2026 model year KTM, Husqvarna, and GasGas motocross and off-road models, 22 mm (stock) or 23.5 mm offset (adds stability). Choose from black, orange, blue, or red anodize colors. Includes upper and lower clamps, steering stem with OEM lower bearing/race/seal installed, steering stem nuts, high-strength steel pinch bolts, and anti-seize.
Installation instructions can be found on our customer page.
| Luxon Part# | LUX-KTM-SS-A0021 |
|---|---|
| Luxon Description | Gen3 Triple Clamps, KTM, Husqvarna, GasGas |
| Luxon Weight (with 1 1/8" 4-Post Bar Mounts) | 2,184 g, 4.81 lbs |
| Stock Weight (2026 KTM/Husky) | 2,229 g, 4.91 lbs |
| Stock Weight (Powerparts Factory Clamps) | 2,300 g, 5.07 lbs |
| Xtrig ROCS with PHDS Bar Mount | 2,313 g, 5.10 lbs |
| Ride Engineering Split Clamps | 2,350 g, 5.18 lbs |
- Stock Offset of 20 mm
- KTM EXC/EXC-F XC-W/XCF-W 2013-2015
- Husqvarna TE/FE 2014-2015
- Stock Offset of 22 mm
- KTM SX/SX-F 2013-2026
- KTM XC/XC-F TPI-XC-F 2016-2026
- KTM EXC/EXC-F TPI-EXC-F XC-W/XCF-W TPI-XCF-W 2016-2026
- Husqvarna TC/FC/TX/FX/TE/FE 2016-2026
- GasGas MC/MC-F/EC/EC-F 2021-2026